Table of Contents
Advertisement
Assembly
Step 4 : Adjusting The Cutting Height
The cutting height can be adjusted in 6 steps with the cutting height adjustment.
1. Pull the handle outwards slightly.
2. Set the required cutting height.
3. Release the lever again.
Step 5 : Inserting/ Replacing The Battery
1. Charge the battery as described in the user manual of the charger.
2. Open the battery cover.
3. Press the charged battery into the power tool until it clicks into place.
4. Close the battery cover.
5. To remove, press the release button and pull out the battery.
!
CAUTION - Protect the battery contacts when the battery is no longer being used. Loose
metal parts may short-circuit the contact - Explosion and fire hazard!
21
Advertisement
Table of Contents
