Kingsman marquis SOLARA ZCV3622NE2 Installation Instructions Manual page 35

⚠
NOTE:
Glass Media must be evenly spread over the Burner and False Bottom
as described on last page before Rock / Stones / and Log Accessories are placed.

MQROCK2, MQROCK3, MQRBD1 -
MQRock2
Or
MQRock3
 Pilot Area Must Not Be Covered, as delayed ignition can occur.
 Do Not Cover any part of the burner tube with rocks or logs as sooting may occur.
 In some positions, Logs can cause flame pattern to roll backward, causing sooting. If this occurs, re-
position Logs.
 MQ STONE DECORATIVE STONE SET-
stack or overlay when placing on Burner Tube. Do Not cover Pilot Area. Not all stones will be used on some models.
 MQEMBER
- Place these glowing ember chunks randomly. Embers may be used with or without other accessories.
 ULK2 UNIVERSAL LIGHT KIT (Optional Accent Lighting Kit)- See separate installation page.
Place rocks randomly onto False Bottom. Be careful not to cover any
part of the Burner Tube as sooting may occur.
⚠
NOTE
Place Stones onto False Bottom and Burner Tube randomly. Do Not
MQRBD1
*Pilot Shield should be visually inspected
monthly for signs of deterioration due to flame
exposure. Replace if necessary.
Burner Tube & Pilot Area
Must Not Be Covered.
35