Step 2: Starting the device
•
Make sure the device has been filled with water before turning on. Do not run dry.
•
Plug the power cord into a wall outlet and switch on.
•
Turn the Steam Adjustment Dial from 'Off' to your desired setting – the further the
dial is turned toward 'MAX', the higher the steam intensity will be (Figure 2a).
•
When the dial is turned, the device's indicator light will first turn RED. This is to
indicate that it is powered on and heating up.
•
Once the device's indicator light changes to GREEN, it is ready for use. This may
take approximately 30 seconds, depending on the amount of water in the tank.
•
Press and hold the Steam Button to release steam.
•
Direct the outlet (with any connected nozzle or accessories) toward the surface you
wish to steam while holding the steam button. To stop flow of steam, release the
button.
CAUTION:
Always ensure that steam outlet and any nozzles or accessories are pointed in a safe
direction (away from yourself, other people, pets and plants) when steam is being
emitted.
2a. Steam adjustment dial