Table of Contents
Advertisement
Cleaning water tank
•
Use measuring cup to make a mixture of approximately 100ml distilled water and
50ml vinegar.
•
Slowly pour the water-vinegar solution into water tank via fill hole then replace
water tank cap.
•
Plug-in power cord set steam adjustment dial to Max and spray full contents of
water tank into a sink or tub.
•
Once water tank is drained, turn unit off and refill tank with 380ml of fresh distilled
water. Set steam adjustment dial back to Max and spray full contents of water tank
into a sink or tub. If you used a water-vinegar solution, you may need to repeat this
until vinegar odour dissipates.
•
Replace water tank cap, unplug the power cord and store steamer as usual.
IMPORTANT: On average, it is recommended that you follow this procedure once per month
(if the unit is used once a week). More frequent use may require following the procedure
more often to keep the device operating at full potential. Do not exceed 20 hours of use
without cleaning out mineral build-up.
Advertisement
Table of Contents
