Table of Contents
Advertisement
Hose
•
The hose attachment connects to the jet nozzle in a similar way to the utility nozzle
(as shown in Figure 5b), however the hose can only be correctly secured if it is
attached the right way up.
•
Look for the arrow icon on the hose ( ) and ensure it is in line with the jet nozzle
before inserting. Insert and rotate 90° to secure the hose.
•
If done correctly, the release latch on the hose (Figure 6a) will be facing upright
when complete.
•
To remove the hose from the jet nozzle, pull the release latch away from the
adapter to unlock. You can now rotate the hose to detach it from the jet nozzle.
Note:
If you encounter leaking from the hose, ensure it is attached correctly. The Release
Latch must be facing upward and secured in place. If the hose can be removed without
using the release latch, it is not attached correctly.
Figure 6a
Release
latch
Advertisement
Table of Contents
