Kogan KAMOPSTM03P User Manual

Kogan KAMOPSTM03P User Manual

3-in-1 premium steam mop

Advertisement

Quick Links

3-IN-1 PREMIUM
STEAM MOP
KAMOPSTM03P

Advertisement

Table of Contents
loading

Summary of Contents for Kogan KAMOPSTM03P

  • Page 1 3-IN-1 PREMIUM STEAM MOP KAMOPSTM03P...
  • Page 3: Safety And Warnings

    • If the circuit breaker activates while using the steam function, discontinue product use immediately and contact help.kogan.com before further use. Beware of the risk of electrical shock. •...
  • Page 4 Caution: Always wear suitable shoes when using your steam mop and when • changing the accessories on your steam mop. Do not wear slippers or open-toed footwear. • The lid may become hot during use. • Care should be taken when using this appliance. DO NOT touch any parts which may become hot during use.
  • Page 5 COMPONENTS A Main body Microfibre pad B Handle tube Carpet glider C Handle Measuring cup D Mop head...
  • Page 6 1 Handle Water tank button 2 Steam button 10 Water tank 3 On/off Switch Water tank cap 4 Cord storage 12 Power cord 5 Handle tube 13 Button battery installation position 6 Cord storage 14 Detergent tank 7 LED light 15 Detergent spray pedal 8 Mop head spindle...
  • Page 7 ASSEMBLY Note: Each steam mop is tested prior to sale to ensure product performance and safety. When assembling your new steam mop for the first time you may notice water residue inside of the unit. This is normal. Attaching the handle •...
  • Page 8 Attaching the steam head • Slide the bottom end of main body onto the steam head until Steam Head Spindle clicks into place (2a). • The steam head can be removed from the Main body by pressing salient point on the Steam head Spindle (2b.) Attaching a cleaning pad •...
  • Page 9: Filling The Water Tank

    FILLING THE WATER TANK Method one Open the water tank cap, use the measuring cup to fill with 420mL of water, then close the water tank cap. Method two Remove the water tank from main body, open the water tank cap, and fill the water tank from water faucet.
  • Page 10: Operation

    OPERATION Install the button battery into the handle battery compartment. Button battery installation Plug in the appliance to a grounded wall outlet. Press the power switch. The indicator lights will turn red, indicating preheating. If the lights do not turn on, please check the Troubleshooting section at the back of this user guide for more details.
  • Page 11: Cleaning And Care

    CLEANING & CARE WARNING: Do not immerse the appliance in water. Ensure that the product is powered off and unplugged before cleaning the appliance. Empty the water tank after use every time and clean the water tank. How to decalcify the water tank interior To clean calcium deposits that builds up inside the water tank, add one or two tablespoons of white vinegar to water tank and then shake the contents.
  • Page 12 Notice: Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that there is no debris left in the system. This product contains no serviceable parts. Do not try to repair it by yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician.
  • Page 13 SPECIFCATIONS Rated voltage 230V Rated frequency 50Hz Output power 1300W (+5%, -10%) Water tank capacity About 420ml Waterproof level IPX4...
  • Page 14: Troubleshooting

    TROUBLESHOOTING Use troubleshooting guide as a first step to resolve any problems you may be experiencing. If further assistance is required, contact help.kogan.com for support. WARNING: o reduce risk of personal injury, unplug the steamer before servicing and allow to cool.
  • Page 15 NOTES...
  • Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...

Table of Contents