Table of Contents
Advertisement
Utility nozzle / Small adapter
•
Align the utility nozzle with the jet nozzle (look for the
until secured in place (Figure 7a).
•
To remove the utility nozzle, rotate 90° in the opposite direction and detach.
•
The utility nozzle attachment doubles as an adapter for the accessories with small
bases (such as the brushes, scraper and window/upholstery tool).
•
To fit these accessories, first fit the utility nozzle to the jet nozzle, then align the
desired small accessory with the utility nozzle, insert, and rotate 90° until secured in
place (Figure 7b). Look for the arrow icons to assist with alignment.
•
To remove the small accessories, rotate 90° in the opposite direction and detach.
Small accessory bases
WARNING:
The tip of the Jet Nozzle becomes hot during use. Ensure the jet
nozzle has cooled down after use (at least 5 minutes) before attaching the
utility nozzle.
Utility nozzle
(Small adapter)
Figure 7a
Utility nozzle
(Small adapter)
Figure 7b
icon), insert, and rotate 90°
Jet nozzle
(Large adapter)
Advertisement
Table of Contents
