Table of Contents
Advertisement
Quick Links
Hex Monitor Desk Mount
Instruction Manual
SKU: STAND-V006
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v006
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Related Manuals for Vivo STAND-V006
Summary of Contents for Vivo STAND-V006
- Page 1 Hex Monitor Desk Mount Instruction Manual SKU: STAND-V006 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v006 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 22lbs Failure to do so may result in serious injury. (10kg) PER ARM Phillips Screwdriver ASSEMBLY STEPS STEP 1 Attach pole (a) to clamp (b) at desired height with screws (i) and Allen wrench (j). Secure clamp to desk.
- Page 4 STEP 2 Attach arm assembly (c) to the pole (a) with screws (h) at desired height, making sure the cable clips are facing down. Repeat for second arm assembly.
- Page 5 STEP 3 OPTION A: Flat Back Monitor Mount monitors to VESA plates using thumbscrews (d) and washers (f). Do not overtighten; thumbscrews only need to be finger-tight. OPTION B: Curved Back Monitor For curved back monitors use screws (e), washers (f), and spacers (g).
- Page 6 STEP 4 Manage cables using the cable clips. Cables on top arm assembly can be passed through the top of the pole and out the rear cable hole below. To adjust swivel joint tension, remove the plastic cover and turn the bolt underneath with the Allen key (j).
- Page 7 STEP 5 To adjust tilt support, remove the plastic cover and turn the nut underneath with the wrench (l). Turn the bolt counterclockwise to lower the center monitor, turn the bolt clockwise to raise the center monitor.
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S AVG. RESOLUTION TIME 309-278-5303 (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V006 and is the answer not in the manual?
Questions and answers