Advertisement
Installation Guide
Power Monitoring
E30E Series
Gateway
Configuration (cont.)
Z206792-0B
Page 19 of 24
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Shop for Power Metering products online at:
3. SNMP mode
SNMP mode uses two unique parameters. The SNMP_Community string is used to control access to the device. Whatever value
entered must be used in the MIB browser or SNMP access software to communicate with this device.
The last parameter, SNMP_Notif_IP is used to set the IP address of the client that used to receive SNMP event notifications, such as
alarms.
Operating the E30E
Restart the E30E by using the button at the bottom of the GUI or by cycling the power. It takes about 30 seconds to initialize
completely and be ready for external communication.
©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
PowerMeterStore
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
www.
04142
1.877.766.5412
.ca
TM
Advertisement
