Advertisement
Installation Guide
Power Monitoring
E30E Series
Gateway
Configuration (cont.)
Z206792-0B
Page 14 of 24
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Shop for Power Metering products online at:
Using the GUI to set up the IP address for use on your network
1. Access the GUI according the instructions in the "Accessing the Graphical User Interface (GUI)" section. To set IP address
parameters, click the button labeled "Diagnostics and Debugging."
The Diagnostics screen appears.
Have the desired IP settings ready in advance (contact the system administrator). IP parameters for use with BACnet IP are
static, not dynamic.
©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
PowerMeterStore
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
www.
04142
1.877.766.5412
.ca
TM
Advertisement
