Anti Icing Mode; Simulated Anti-Icing Mode; Selecting The Simulated Anti-Icing Mode; Setting The System For Simulated Anti-Icing - Bosch Rexroth CS 440RC Detailed Configuration And Set-Up Manual

11 Anti-icing Mode
The 440 has the capability of operating as an Anti-icing Controller for a single boom
or a multiple boom anti-icing system.
11.1

Simulated Anti-icing Mode

In the simulated anti-icing mode the spreader is equipped with a single boom across
the back of the truck and is capable of applying salt/sand and pre-wetting the
salt/sand or applying a liquid de-icer for a single lane anti-icing application.
11.1.1 11.1.1 11.1.1 11.1.1 Selecting the Simulated Anti- - - - icing Mode Selecting the Simulated Anti Selecting the Simulated Anti Selecting the Simulated Anti
Insert the programming key, select "SYSTEM SETUP" and select SIMSPD+ANTI-ICE",
the screen to the left will appear.
Using the navigation buttons, move the cursor to "SIM ANTI-ICING" and press the
Enter button. The screen will return to the previous screen.
Press the Escape button to return to the first screen.
11.1.2 11.1.2 Setting the System for Simulated Anti- - - - icing Setting the System for Simulated Anti
11.1.2 11.1.2 Setting the System for Simulated Anti Setting the System for Simulated Anti
Using the navigation buttons, move the cursor to "MATERIAL SETUP", select
"PREWET 1" and press the Enter button. The screen to the left will appear.
11.1.3 11.1.3 11.1.3 11.1.3 Change LIQUID

Change LIQUID1 to Read PREWET

Change LIQUID Change LIQUID
Press Enter and using the Left or Right navigation button, move to letter to be
•
changed.
Using the Up or Down navigation button, change the letter as required.
•
Once all the letters have been changed, press the Enter button.
•
11.1.4 11.1.4 11.1.4 11.1.4 Entering the Pre- - - - wetting Liquid Rates Entering the Pre Entering the Pre Entering the Pre
Move the cursor to the first line of rates and press Enter.
•
Using the Left or Right navigation button, move to number to be changed.
•
Using the Up or Down navigation button, change the number as required.
•
Once all the numbers have been changed, press the Enter button.
•
Calibrate this liquid as per calibration procedure under "PREWETTING AUTO
CALIBRATION".
icing Mode icing Mode icing Mode
icing
icing icing
1 to Read PREWET 1 to Read PREWET 1 to Read PREWET
wetting Liquid Rates wetting Liquid Rates wetting Liquid Rates
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
38/57