Bosch Rexroth CS 440RC Detailed Configuration And Set-Up Manual page 4

12.4 Setting the "Maximum" Blast Rate
12.5 Blast Rate Setting the "Closed Loop"
13 13 13 13 Operator Option Configuration Operator Option Configuration Operator Option Configuration Operator Option Configuration
13.1 Presetting the Gate Opening
13.2 Presetting the Material Selection
13.3 Presetting the Pre-wet Selection
13.4 Setting the Operator Options
13.5 Resetting the Season Total
14 14 14 14 High Speed Alarm Set High Speed Alarm Set High Speed Alarm Set High Speed Alarm Set- - - - up
14.1 Setting the High Speed Alarm
15 15 Temperature Sensor Configuration Temperature Sensor Configuration
15 15 Temperature Sensor Configuration Temperature Sensor Configuration
15.1 Selecting the Temperature Sensor Manufacturer
15.2 Temperature Compensation
16 16 Error Message Configuration Error Message Configuration
16 16 Error Message Configuration Error Message Configuration
16.1 Operational Errors
16.2 Inputs and Outputs Errors
16.3 Error Time Delay
16.4 Error Action
17 17 17 17 Frequently Asked Questions (FAQs) Frequently Asked Questions (FAQs) Frequently Asked Questions (FAQs) Frequently Asked Questions (FAQs)
17.1 CS-440RC
17.2 Hydraulic
Bosch Rexroth Canada Corp. reserves the right to revise this information at any time and for
any reason and reserves the right to make changes at any time, without notice or obligation, to
any of the information contained in this piece of literature.
Please check for updates at:
up up up
www.boschrexroth.ca/compu-spread
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
4/57
42
42
43 43 43 43
43
43
44
44
44
45 45 45 45
45
46 46
46 46
46
46
47 47
47 47
47
47
48
48
50 50 50 50
50
56