System Configuration; Resetting The Parameters To Default Settings; Setting The Location Id; Setting The Truck Id - Bosch Rexroth CS 440RC Detailed Configuration And Set-Up Manual

3

System Configuration

3.1

Resetting the Parameters to Default Settings

Insert the programming key, select "SYSTEMS", and select "SYSTEM RESET". The
screen to the left will appear.
If the parameters are to be reset, move the cursor to "YES" and press the Enter
button. If the parameters are not to be reset, press the Enter button.
Press the Escape button to return to the first screen.
3.2

Setting the Location ID

Insert the programming key and select "SYSTEMS", and select "NAME-ID". The
screen to the left will appear.
To add or edit the REGION name, press the Enter button.
There are 8 digits available for the name, using the Left or Right navigation button,
move the cursor under the letter or number to be added or changed.
Using the Up or Down navigation button, change the letter or number as required.
Once all the letters or numbers have been added or changed. Press the Enter
button.
Press the Escape button twice to return to the first screen.
3.3

Setting the Truck ID

Insert the programming key, select "SYSTEMS", and select "NAME-ID". The screen
to the left will appear.
Use the Down navigation button to move the cursor to "TRUCK ID" and press the
Enter button.
There are 8 digits available for the truck ID, using the Left or Right navigation button
move to the letter or number to be added or changed.
Using the Up or Down navigation button, change the letter or number as required.
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
12/57