Simulated Ground Speed - Bosch Rexroth CS 440RC Detailed Configuration And Set-Up Manual

4.1.7 7 7 7 Simulated Ground Speed

4.1. Simulated Ground Speed
4.1. 4.1. Simulated Ground Speed Simulated Ground Speed
Simulated ground speed activation in operation mode (without a key):
Make sure that the vehicle is stationary (ground speed = 0) and display is on main
OPERATION SCREEN, as shown to the left.
Hold Enter button down, press Escape button, and let go both buttons at the same
time.
Press Escape to switch to OPERATOR SCREEN, as shown to the left.
Press Up and Down buttons to adjust simulated ground speed, as shown to the left.
The speed will increase and decrease in 5 mile or kilometer per hour increments.
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
19/57