Downloading And Importing The Quick Start Example Project; Download And Extract The Quick Start Example Project; Launch E2 Studio; Enter A Name In The Workspace Dialog Box - Mikroe RA4M1 CLICKER Quick Start Manual

3. Downloading and Importing the Quick Start
Example Project
3.1 Download and extract the Quick Start example
project to a local directory on the host PC.
The Quick Start example project (source code and project files) is available
in the RA4M1 Clicker Example Projects Bundle, on the
Libstock page
Before booting up the e studio, find the file called Mikroe.RA_board_
2
RA4M1_clicker.2.0.0.pack located at "ra4m1_clicker_other_arm" in the
E2_Studio_Pack folder of the Quick Start Example projects package.
After that copy the pack file into:
\Renesas\RA\e2studio_v2020-10_fsp_v2.0.0\internal\projectgen\ra\packs
Please note that the version of FSP has to match the Clicker pack version, in
this guide we used the 2.0 version.
3.2 Launch e studio
2
3.3 Enter a name in the Workspace
workspace folder or browse to an existing one and click on the Launch
button. On the Welcome screen click on Import existing projects and
under Select Root Directory click on the Browse button
to where you extracted the RA4M1 Clicker Example Projects and click on
Select folder. You should see all the example projects in the list below.
Click on Finish when you are done.
RA4M1 Clicker
dialog box to create a new
(1) then navigate
RA 4 M 1 C L IC K ER Q U I C K S T A R T G U I D E
1