Mounting Gsc3625 - Grandstream Networks GSC362 Series User Manual

Mounting GSC3625

Step 1: Use supplied drill template to drill holes in the wall Select appropriate anchors or screws based on
wall material. Insert the anchors if necessary.
Step 2:
Place the cable into the groove of camera mounting
base, mount the base at wall using provided
screws as shown in below diagram. Leave the
connectors of cable dangling outside the cover.
Step 3:
Use the provided hex key to lose the fix screw,
rotate and adjust the camera to the appropriate
angle and position.
Step 4: Hold the body of camera and align to the
notch as shown in the diagram, then push the body
of camera into the cover of camera already
mounted at the wall.
Figure 5: Mounting GSC3625
GSC362X Series User Manual
Version 0.0.0.5
P a g e | 19