Grandstream Networks GSC362 Series User Manual page 39

Outbound Proxy Mode
Enable RTCP
H.264 Payload Type
Accept Incoming SIP from
Proxy Only
Vocoder Settings
Preferred Vocoder 1
Preferred Vocoder 2
Voice Frame Per TX
In route: outbound proxy FQDN is placed in route header. This is used for
the SIP Extension to notify the SIP server that the device is behind a
NAT/Firewall.
Always sent to: SIP messages will always be sent to Outbound proxy.
Not in route: remove the Route header from SIP requests.
This option allows 3rd party Service Provider or Cloud Solution to monitor
the operation status of the GSC362X by using related SIP Calls.
By default, it is disabled. Users can choose either RTCP or RTCP-XR.
The H.264 payload type can now be configured to be compatible with 3rd
party video phones, as well as other advanced SIP settings, to easy system
integration process. Default is 99.
When set to "Yes", the SIP address of the Request URL in the incoming
SIP message will be checked. If it does not match the SIP server address
of the account, the call will be rejected. The default setting is disabled.
Select audio codec to prioritize. Supported codecs are: PCMU and PCMA.
Select the second audio codec PCMU or PCMA.
Configures the number of voice frames transmitted per packet. When
configuring this, it should be noted that the "ptime" value for the SDP will
change with different configurations here. This value is related to the codec
used and the actual frames transmitted during the in-payload call. For end
users, it is recommended to use the default setting, as incorrect settings
may influence the audio quality. Range is from 1-64. The default setting is
2.
GSC362X Series User Manual
Version 0.0.0.5
P a g e | 39