Powering And Connecting The Gsc362X; Option A (Recommended); Option B - Grandstream Networks GSC362 Series User Manual

Powering and Connecting the GSC362X

The GSC3620/GSC3625 can be powered either using the right PSU (DC12V, 1A) or using a PoE switch,
please refer to illustration below to do the wiring and connect the waterproof RJ45 socket:

Option A (Recommended)

1. Based on T-568B (see diagram below) to install the RJ45 plug, tighten the connector using the
provided waterproof socket.
2. Connect other end of the cable into a switch supporting Power over Ethernet.

Option B

1. Wire the cable and connect it to a network switch as in the figure above.
2.
Connect a 12VDC, 1A (minimum) Power Adapter (not provided) to the power socket of the
GSC3620 tail cable. Make sure the polarity "+" (center) and "-" (outside) are correctly connected.
Figure 3: RJ45 plug installation
GSC362X Series User Manual
Version 0.0.0.5
P a g e | 17