Before Requesting Service - Panasonic NN-SM330W Operating Instruction And Cook Book

Before Requesting Service

ALL THESE THINGS ARE NORMAL:
The oven causes interference with
my TV.
Steam accumulates on the oven
door and warm air comes from
the oven vents.
I accidentally operate my
microwave oven without any food
in it.
PROBLEM
Oven will not turn on.
When the oven is turning on,
there is noise coming from
Glass Tray.
Oven will not start cooking.
342W/M:
For NN-ST340W:
Oven will not start cooking.
The word "Child" appears in the
Display Window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
Some radio and TV interference might occur when you cook with the microwave
oven. This interference is similar to the interference caused by small appliances
such as mixers, vacuums, hair dryers, etc. It does not indicate a problem with your
oven.
During cooking, steam and warm air are given off from the food. Most of the steam
and warm air are removed from the oven by the air which circulates in the oven
cavity. However, some steam will condense on cooler surfaces such as the oven
door. This is normal.
Operating the oven empty for a short time will not damage the oven.
However, we do not recommend this to be done.
POSSIBLE CAUSE
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or
blown.
There is a problem with the outlet.
The roller ring and oven bottom are dirty.
The door is not closed completely.
Start Pad was not pressed after pro-
gramming.
Another program has already
been entered into the oven.
The program has not been entered cor-
rectly.
Stop/Reset Pad has been pressed acci-
dentally.
The Child Lock was activated by press-
ing Start Pad 3 times.
- Eng-15 -
REMEDY
Remove plug from outlet, wait 10 sec-
onds and re-insert.
Contact the specified service center.
Plug another appliance into the outlet to
check if the outlet is working.
Clean these parts according to care of
your oven (See next page).
Close the oven door securely.
Press Start Pad.
Press Stop/Reset Pad to cancel the pre-
vious program and program again.
Program again according to the
Operating Instructions.
Program oven again.
Deactivate Lock by pressing Stop/Reset
Pad 3 times.