Table of Contents
Advertisement
Identifying the Firmware Version:
From M1 firmware and above the Firmware version is shown at startup.
Once power is provided the 207 will flash all leds from top to bottom.
Then will briefly double blink 2 single leds, in the M1 case the first led to blink will be
Button 5 (which also has an M letter by it's side), then it will blink Button 1.
So button 5-3 can be decoded as Firmware M3.
After the 2 single leds blink the module will flash all buttons from the bottom to the top
and will be ready to use.
ADDAC207 INTUITIVE QUANTIZER
Revision.05
April.2021
USER'S GUIDE
Advertisement
Table of Contents
Need help?
Do you have a question about the ADDAC207 and is the answer not in the manual?