Operation - aventon LEVEL User Manual

GETTING STARTED
First, tap the power button on the battery to turn on. The current
charge level will be flashed upon four green LEDs (4 = full, 1 = near
empty), then one green LED to show the battery is turned on. Next,
press and hold the "M" button on the handlebar controls to turn on the
"M" for 3 seconds.
LEVEL
assist, simply start pedaling, then tap the "U" or "D" arrows to increase
or decrease the amount of pedal assist. Pedal assist will engage at
speeds up to 28 MPH.
The LEVEL E-Bike is equipped with a throttle, which is mounted near
the rider's left thumb, to propel the bike without pedaling. To use the
throttle, start pedaling then apply the throttle. Once the bike is moving
on throttle power, you can stop pedaling entirely and use your thumb
to control the speed of the bike. The throttle can propel you at speeds
up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake levers,
or release the throttle. Simply start pedaling again to re-engage the
motor.
BATTERY AND CHARGING
W
temperature conditions. To charge the battery, plug the charger into
the charging port and then connect the charger to a wall outlet. The
LED indicator light will be red when charging and will turn green when
charging is complete.
MAINTENANCE AND SERVICE
LEVEL
Properly maintaining your Pace 350 ensures its longevity and smooth
operation. Before assembling your bike, please watch the "How To
Assemble" video we've prepared for you. If you have questions during
the assembly process, please contact Aventon at (866) 300-3311 or
email info@aventon.com.
SAFETY
You should wear an approved bicycle helmet every time you ride
a bicycle, regardless of the legal requirement to do so. You should
comply with local law when riding your Pace 350 E-Bike.
LEVEL
23