aventon LEVEL User Manual page 10

Assembled
NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are
not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult
a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1. Unpack the bike. Open the bike box and remove the small box inside. With the help of another
person capable of safely lifting a heavy object, remove the Level from the bike box. Carefully remove the
packaging material protecting the bike frame and components. Please recycle packaging materials
especially cardboard and foam whenever possible. Open the small box and carefully took out all contents.
Step 2. Remove the stem rubber cover, loosen the bolt using a 5mm hex key, and discard the plastic
white protective guard.
Step 3. Place the handlebar stem onto the stem with the display facing upwards, replace the top cap and
use a 5mm hex key to secure the handlebar stem. Reinsert the rubber cover back into the top cap.
Rubber Cover
White Plastic Stem
Protective Guard
5mm Hex Key
5mm Hex Key
09