aventon LEVEL User Manual page 15

Step 10: Inflate the tires. Check that the tire beads and tires are evenly seated on the rims. Use a pump
with a Schrader valve and pressure gauge to inflate each tire to the recommended pressure indicated on
the tire, min as 50 PSI , max as 80 PSI. Do not overinflated or underinflate tires.
Step 11: Install saddle.
A. Open the quick release lever fully and remove the black seatpost protection cover.
Quick Release
Protection Cover
B.Insert the seatpost into the seat tube. Adjust the seatpost to a comfortable height, while ensuring
the seatpost is inserted past the minimum insertion point. Pull back seatpost clamp lever.
If needed, turn the adjustment nut clockwise to increase tension to the clamp to ensure proper clamp
force when the lever is in line with the clamp bolt, but do not overtighten. Close the quick release
lever to secure the seatpost and check that it is secure. See the Adjusting the Seat section of this
manual for more details.
14