General Description; General Features - Maquet ALPHAMAXX Operating Instructions Manual

1133.02BX
Fig. 1: Permissible patient orientation
NO
GA113302GB11
III. General description
III. General description

1. General features

In principle, the ALPHAMAXX 1133.02 operating table
is suitable for the following surgical procedures:
〈
in the thorax and abdominal areas
〈
in the head area
〈
in gynaecology
〈
in urology
〈
in orthopaedics
If required, separate accessories can be attached to
the operating table.
The table top is subdivided into 6 sections:
〈
Head rest (removable)
〈
Upper back plate (removable)
〈
Lower back plate
〈
Seat plate
〈
Split leg plates
The lower back, seat and leg plates are adjusted under
motor power.
The head rest and the upper back plate are adjusted
manually.
X-ray cassettes can be inserted underneath the back
plate.
The side rails are used to fix the accessories.
2. Versions
Various versions of the 1133.02 operating table are avail-
able:
1133.02B1
1133.02B3
1133.02F1
1133.02F3
The cable-connected hand control, the IR transmitter
YES
and charging station for the IR transmitter as well as
the head rests, upper back plates and leg plates are to
be ordered separately. The order numbers are listed in
Chapters VIII and IX.
For patients weighing up to 135 kg (300 lb), place
the operating table only on its castors (UNLOCK)
up to the maximum table top height of 940 mm
(37 in)! The warning sign is not seen!
For patients weighing from 135 kg up to 225 kg
(300 - 500 lb), place the operating table only on
its castors (UNLOCK) when the table top is in its
lowest position!
Using the UNLOCK function for patient weights
exceeding 225 kg (500 lb) is not permissible!
Operating table incl. SFC pads and stand-
ard side rails
Operating table incl. SFC pads, standard
side rails and motor drive for the base
Operating table incl. SFC pads and US
side rails
Operating table incl. SFC pads and US
side rails and motor drive for the base
7