Noise And Vibration - Flex XFE 7-12 80 Original Operating Instructions

Work especially carefully near corners,

sharp edges, etc. Prevent the insertion
tool from recoiling off the workpiece and
jamming. The rotating insertion tool has
a tendency to snag on corners, sharp
edges or if it bounces. This causes a loss
of control or kickback.
Do not use a chain or toothed saw blade.

Such insertion tools frequently cause
a kickback or the loss of control of the
electric power tool.
Additional safety instructions
The mains voltage and the voltage specifi
cations on the rating plate must correspond.

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 62841.
The A evaluated noise level of the power tool
is typically:
– Sound pressure level L
– Sound power level L
– Uncertainty:
Total vibration value (when polishing painted
surfaces):
– Emission value:
– Uncertainty:
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration emission level given in this infor-
mation sheet has been measured in accor-
dance with a standardised test given in
EN 62841 and may be used to compare one
tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level repre-
sents the main applications of the tool.
However if the tool is used for different appli-
cations, with different accessories or poorly
maintained, the vibration emission may differ.
16
: 80 dB(A);
pA
: 91 dB(A);
WA
K = 3 dB.
a = 6.5 m/s
h
K = 1.5 m/s
This may significantly increase the exposure
level over the total working period.
For a precise estimation of the vibration load
the times should also be considered during
which the power tool is switched off or even
running, but not actually in use.
This may significantly increase the exposure
level over the total working period Identify
additional safety measures to protect the ope-
rator from the effects of vibration such as:
maintain the tool and the accessories, keep
the hands warm, organisation of work paterns.
-
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
2
2
XFE 7-12 80