Baxi LUNA3 SYSTEM HT 1.180 MP Installers And Users Instructions page 43

3.8 - fault warnIngs anD resettIng the boIler
If a fault occurs, a flashing warning code appears on the display.
The fault warnings appear on the main display (figure 1 a) together with the symbol (Figure 4).
.
To reset, press the reset button for at least two seconds
Figure 4
Fault warnings appear on the secondary display (figure 1 b) alternating with the time, both of them flashing (figure 4.1). It
is not possible to reset malfunction warnings which appear on the secondary display as the cause of the alarm has first
to be removed.
Figure 4.1
InstructIons pertaInInG to the user 925.916.2 - GB
43