Adaptec 2256100-R Installation And User Manual page 46

HELP (next section)
●
LIST on page 46
●
SAVE on page 46
●
UPDATE on page 47
●
VERIFY on page 48
●
VERSION on page 48
●
HELP
The command displays a summary of AFU functions and command switches.
HELP
Examples
The following are the examples of command syntax that will display the help:
A:\> AFU HELP
A:\> AFU /?
LIST
The command displays the AFU-supported SATA/SAS controllers installed on your
LIST
computer. Use this command to see which SATA/SAS controllers are installed, and to identify
the ID numbers assigned to each physical controller.
You do not have to restart the computer after completing this command.
Example
This example shows a typical system response to a
A:\> AFU LIST
Adaptec Flash Utility V1.0
(c)Adaptec Inc. 1999–2008. All Rights Reserved.
Controllers Detected and Recognized:
Controller #0 (03:01:00) ASC-1045/1405
SAVE
The command saves the contents of a SATA/SAS controller's flash in a UFI file. The name
SAVE
of the UFI file is based on the SATA/SAS controller type and it cannot be modified.
Command Syntax
The command syntax for the
Controller ID
AFU SAVE [/C<
Command Switches
The following switches are available:
/C <Controller ID> is the SATA/SAS controller(s) IDs representing the set of controller(s)
●
on which the command can be performed. By default, the AFU value set is Controller 0.
Appendix 10: Using the Adaptec Flash Utility for DOS
command:
LIST
command is as follows:
SAVE
UFI File Path
>] [/D < >]
46
●