3
The device that is set as a bootable device is indicated with "+" symbol in the screen.
Note:
The selected bootable device will be the boot device when "BBS Support" has been set to
"Controller" on the "Controller Configuration" menu. See
If the BBS Support option is set to Device, the system BIOS can boot from any of the attached
SATA/SAS devices.
Locating a SES Slot for Enclosures and Expanders
1
Select the SES device and press <Enter>. The following option appears.
Blink LED on all slots - Use this option to blink on all slots to ensure that all the slots in the
●
Backplane and Expanders are working properly.
Blink LED on specific slot - Use this option to locate a specific slot.
●
Rewinding/Ejecting for Tape Devices
Select Rewind to rewind the tape and select Eject to eject the tape.
Chapter 7: Configuring the Controller Utility
page 33
l 37