Table of Contents
Advertisement
5.0. Installation
5.1. Location planning
• Do not bury the trampoline into the ground.
• Place the trampoline on a flat, level surface with impact attenuating
properties – such as grass.
• Ensure that the trampoline is sufficiently stable, to prevent the
trampoline from tipping over or blowing away. Sandbags or pegs
may be suitable anchorage devices.
• Keep a minimum of 8 m overhead clearance, when measured
from the bed height, to prevent users from inadvertently contacting
overhead hazards – such as electric wires, tree limbs and clotheslines.
• Maintain a minimum clearance of 2 m on all sides of the trampoline.
This area should not include concrete, bitumen, brick or other hard
surfaces, as these can cause serious injuries if users fall off the
trampoline.
• Do not locate the trampoline on top of other objects or store anything
underneath the trampoline bed.
• Keep the area around and underneath the trampoline clear. Place
the trampoline away from walls, structures, fences and other play
areas.
• Place the trampoline in a well-lit area.
5.2. Parts checklist
M
Frame Tubes, Leaf Springs, Net Poles,
Frame Reinforcements
L
Frame Tubes, Leaf Springs, Net Poles,
Frame Reinforcements
XL
Frame Tubes, Leaf Springs, Net Poles,
Frame Reinforcements
6x BOX A
8x BOX A
10x BOX A
Incorrect Installation
1x BOX B
Joiners
1x BOX B
Joiners, Safety Net, Safety Skirt
2x BOX B
Joiners
Correct Installation
1x BOX C
Jump Mat, Safety Net, Safety Skirt,
Ring Set, Spring Tool, Manual
1x BOX C
Joiners, Jump Mat, Ring Set,
Spring Tool, Manual
1x BOX C
Jump Mat, Safety Net, Safety Skirt,
Ring Set, Spring Tool, Manual
9
Advertisement
Table of Contents
