Installation; Location Planning; Parts Checklist - Vuly Lift Pro Assembly Manual

5.0. Installation

5.1. Location planning

• Place the trampoline on a flat, level surface with impact attenuating
properties – such as grass.
• Ensure that the trampoline is sufficiently stable, to prevent the
trampoline from tipping over or blowing away. Sandbags or pegs
may be suitable anchorage devices.
• Keep a minimum of 8 m overhead clearance, when measured
from the bed height, to prevent users from inadvertently contacting
overhead hazards – such as electric wires, tree limbs and clotheslines.
• Maintain a minimum clearance of 2 m on all sides of the trampoline.
This area should not include concrete, bitumen, brick or other hard
surfaces, as these can cause serious injuries if users fall off the
trampoline.
• Do not locate the trampoline on top of other objects or store anything
underneath the trampoline bed.
• Keep the area around and underneath the trampoline clear. Place
the trampoline away from walls, structures, fences and other play
areas.
• Place the trampoline in a well-lit area.

5.2. Parts checklist

1x BOX A
(L) 1200mm (W) 470mm (H) 245mm
S
Frame tubes, Springs, Safety
pad, Jump mat
1x BOX A
(L) 760mm (W) 390mm (H) 460mm
M
Frame tubes,
Safety pad
1x BOX A
(L) 800mm (W) 425mm (H) 180mm
L
Frame tubes
1x BOX A
(L) 870mm (W) 460mm (H) 410mm
XL
Upper frame tubes,
Safety pad
1x BOX B
(L) 1140mm (W) 385mm (H) 215mm
Net poles, Joiner poles,
Safety net
1x BOX B
(L) 1000mm (W) 470mm (H) 165mm
Joiner poles, Springs
1x BOX B
(L) 1000mm (W) 415mm (H) 225mm
Joiner poles, Jump mat
1x BOX B
(L) 800mm (W) 330mm (H) 220mm
Lower frame tubes, Springs
Correct Installation
Incorrect Installation
1x BOX C
(L) 1140mm (W) 280mm (H) 240mm
Net poles, Safety net,
Jump mat
1x BOX C
(L) 1140mm (W) 300mm (H) 200mm
Net poles, Safety net
1x BOX C
(L) 1140mm (W) 310mm (H) 205mm
Net poles, Safety net
1x BOX D
(L) 760mm (W) 360mm (H) 400mm
Safety pad, Springs
1x BOX D
(L) 1000mm (W) 500mm (H) 215mm
Joiner poles,
Jump mat
9