Table of Contents
Advertisement
13
STEP
A. Lift a Net Pole, raising the Safety Net at the same time, and insert it into the Joiner Pole.
B. Repeat for each Net Pole until you have completely erected the Safety Net.
Remember: Ensure that the Safety Net is correctly assembled.
A properly installed Safety Net is crucial to protect against injuries.
Skirt
14
STEP
Find the first Joiner Pole to the left of the entrance. Hook the Skirt
clip around the Leaf Spring on the left side of that Joiner Pole.
15
STEP
Pull the Skirt clockwise around the trampoline, feeding it through the inside of the Net
Poles as you go.
16
STEP
A. Move the Skirt hook from the Leaf Spring to the Skirt hook loop, once you are back
at the start.
B. Zip the Skirt together, and fasten the Velcro behind each Joiner Pole.
17
STEP
Fasten the Velcro straps together around the Lower Frame Tube at the left and right of each Joiner Pole.
WARNING: Make sure that all push buttons are locked and secured before using your trampoline.
Bouncing on a trampoline with push buttons that are not locked will cause damage and injury.
CONGRATULATIONS!
You have assembled your Thunder Pro trampoline.
15
Advertisement
Table of Contents
