Adaptec 2110S User Manual page 35

The Create Array dialog box appears.
3
Type the Array Name.
The number of characters you can use depends on your
controller. The system only allows you to type as many
characters as your controller permits. That may be as few as 15
characters.
If you leave this field blank, the array will have no name.
4
From the drop-down list box, select an Array Type.
The list of available array types depends on your controller.
For assistance making the selection, see Appendix B, Choosing
Your Array Type.
The Array Information section of the dialog box displays
information about the size of the array you are creating or
problems with your combination of selections. The Array Type
Details section of the dialog box shows how the array type
ranks in each of six array characteristics. For definitions of the
characteristics, see Understanding the Array Selection Criteria on
page B-8.
5
Select the drives you want to use for the array:
– See the Array Information section of the dialog box for the
number of drives you can use to create the array type you
selected.
Creating an Array
2-5