Adaptec 2110S User Manual page 36

Adaptec Storage Manager Pro User's Guide
– If you selected one or more drives in the Details pane and
clicked Create Array, the drives you selected are listed in
the Selected Drives list. To add drives, select one or more
from the Available Drives list and click Add Drives. You
can also double-click a drive.
– To select more than one drive, press and hold the Ctrl key
and click each drive. To select all the available drives, click
Add All Drives.
– The drives you selected move to the Selected Drives list
and display a yellow asterisk showing that they are new
drives for this array. See Understanding the Selected Drive
Icons on page 2-8.
– See the Array Information section of the dialog box for
information about how much space will be used on each
drive.
– In the Array Size section, Storage Manager Pro displays the
size of the array based on the type of array and size of the
drives you select.
6
If you want to view or change the array default properties,
click Set Properties.
The Default Array Creation Properties dialog box appears.
Change the settings as needed and click Save. See Viewing and
Setting the Default Array Creation Properties on page 2-8.
7
Click Create.
The Verify Create Array Settings dialog box appears listing the
settings for the array Storage Manager Pro will create.
2-6