General; Symbols; About The Manual - Innova 3in1 5M Installer Manual

1�1 Symbols
The pictograms in the next chapter provide the necessary
information for correct, safe use of the machine in a rapid,
unmistakable way.
Editorial pictograms
User
• This indicates pages containing instructions or informa-
tion for the User.
Installer
• This indicates pages containing instructions or informa-
tion for the Installer.
Service
• This indicates pages containing instructions or informa-
tion for the Technical Service Centre.
In the texts
– Actions required
Expected responses following an action
• Lists
In the figures
1 The numbers indicate the individual components.
1�2 About the manual
This manual was written to provide all the explanations for
the correct management of the appliance.
Read this manual carefully before using the product and
keep the instructions with you so that you will always have
them available when needed.
the manual is divided into sections:
General information
It addresses all recipients.
It contains general information and important warnings that
should be known before installing and using the appliance.
Installation
It is addressed exclusively to the installer.
It contains specific warnings and all the information neces-
sary for positioning, mounting and connecting the appliance.
Commissioning, maintenance and troubleshooting
They are addressed exclusively to the Technical Assistance
Centre.
It contains specific warnings useful information for the most
common commissioning and routine maintenance.
Technical information
It addresses all recipients.

GENERAL

A The capital letters indicate component assemblies.
The white numbers in black marks indicate a series
1
of actions to be carried out in sequence.
A The black letter in white identifies an image when
there are several images in the same figure.
Safety pictograms
High risk warning (bold text)
• The operation described above presents a risk of serious
physical injury, fatality, major damage to the appliance
and/or to the environment if not carried out in compli-
ance with safety regulations.
Low risk warning (plain text)
• The operation described above presents a risk of minor
physical injury or minor damage to the appliance and/or
to the environment if not carried out in compliance with
safety regulations.
Prohibition (plain text)
• Refers to prohibited actions.
Important information (bold text)
• This indicates important information that must be taken
into account during the operations.
It contains detailed technical information about the appli-
ance.
GENERAL
5