Storage; Unpacking - Innova 3in1 5M Installer Manual

Movement methods
The product can be handled as follows:
• using a hoist or a crane
2�5 Storage
Preliminary warnings
Stored in accordance with the applicable national regu-
lations.
Appliance with packaging
Store the package:
• in a dry and clean place
• in a closed environment protected from atmospheric el-
ements
2�6 Unpacking
Preliminary warnings
Check that no components were damaged during trans-
port.
• using a fork lift or a transpallet which can bear its weight
Use a small balance to prevent the pressure of the belts
damages the unit.
• insulated from the ground by crossbars or pallets
Appliance without packaging
The following procedures are recommended in the case of
medium to long term storage:
• check that no water is present in the hydraulic systems
• do not remove plastic protective films
• check that the electrical panels are closed
Dispose of the packaging components following the ap-
plicable waste disposal regulations. Check for disposal ar-
rangements with your municipality.
The packing material (cardboard, staples, plastic bags, etc.)
must not be dispersed or abandoned in the surrounding
INSTALLATION
15