Table of Contents
Advertisement
2.1
Storage
The appliance is only to be placed in a vertical position, and
the packages stored in a closed environment protected
from the elements.
2.2
Receipt and unpacking
The packaging is made of suitable materials to protect the
machine from stress during transport and handling.
The units are delivered complete and in perfect
condition, however, please comply with the following
warnings to check the quality of the transport services:
-
upon receipt, check if the package is damaged and
if so, accept the goods with reservations and keep
photographic evidence of any damage found.
-
unpack and check the contents against the packing
list.
-
check that none of the parts have been damaged
during shipment. In case of damage, report it to
the shipping company within 3 days of receipt by
registered letter with return receipt and attaching
photographic documentation.
A copy should also be sent by fax to INNOVA. No
notice of damage will be accepted after 3 days from
delivery.
Any dispute will be settled by the Court of TRENTO.
The unit must only be handled by qualified personnel,
who are adequately equipped and with specific tools
for the weight and dimensions of the appliance at the
bottom. When using a forklift, insert the forks into the
openings of the base. Avoid dangerous situations if
you use a hoist to lift the appliance. When using ropes
2.3
Positioning the unit
The location of the appliances should be specified by
the system designer or the person in charge and must
consider both the purely technical requirements as well as
any applicable local legislation.
•
The unit is supplied with vibration dampers already
10
INSTALLATION
Do not stack more than two appliances.
Do not turn the package upside down.
or chains, check that they are in good condition, of
adequate capacity and approved in accordance with
the safety regulations in force in the place of installation.
When the load is lifted from the ground, keep away from
the area below and around it. Avoid laying the product or
placing it in a horizontal position during transport. In fact,
the cooling compressor is mounted on vibration dampers
and may cause the compressor or the connection pipes
to shift out of their seats.
Keep the packing at least for the whole length of warranty
should you need to ship the appliance to the service
centre for repair.
It is forbidden to dispose of and leave the packing
materials (cardboard, staples, plastic bags, etc.) within
the reach of children as they could be a source of
danger.
installed
•
Place the unit on a perfectly level supporting surface.
Make sure that the supporting surface can support the
weight of the appliance.
Advertisement
Table of Contents
