Remote Voice Assist; Using A Bluetooth Headset (Optional) - Panasonic Link2Cell KX-TGD862 Operating Instructions Manual

Remote voice assist

®
For iPhone and Android
users
You can use the handset to operate the voice
recognition feature of a paired cellular phone
(Siri ® , Google Now ™ , or S Voice). For
example, you can speak into the handset and
command your cellular phone to make a call.
Compatible voice recognition features
R Google Now, S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R In order to use this feature, your cellular
phone's voice recognition feature must be
ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now,
make sure your cellular phone is
registered to your Google account.
R If you have multiple voice recognition
features available for your cellular phone,
you may need to set the desired voice
recognition feature as the default.
R For Android users: Depending on your
cellular phone, you may need to set Google
Now or S Voice as your cellular phone's
default voice recognition feature. For more
information, refer to the operating
instructions of your cellular phone.
Activating remote voice assist
1
M N
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 21).
2
MbN: Select the desired cellular phone. a
MSELECTN
3
Wait until "Voice assist" is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
For assistance, please visit http://shop.panasonic.com/support
TA Manual_TGD86x_0921.pdf
™
smartphone
59
Using Bluetooth® Devices
R To switch to the receiver, press MZN.
4
Speak your commands to your handset.
R When you have finished using remote
voice assist, press MOFFN.
Note:
R While using this feature, you cannot use
another handset to make a cellular call
using the same cellular line.
R If you receive a call on the landline or on
another cellular line while using this feature,
the interrupt tone sounds.
R If you receive a call on the same cellular
line while using this feature, voice
recognition ends and the unit receives the
incoming call.
R If your cellular phone is connected to the
base unit, you may not be able to use your
cellular phone's microphone to operate its
voice recognition feature. In this case,
disconnect your cellular phone from the
base unit.
R The compatible voice commands depends
on the cellular phone voice recognition
feature.
Using a Bluetooth headset
(optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
Headset Profile (HSP) specification.
R Only 1 Bluetooth headset can be paired to
the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
*1
line ).
R For best performance, we recommend
using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit
can communicate with Bluetooth headsets
within an approximately 10 m (33 feet)
range.
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
59
2020/09/21 16:00:01