Advanced New Message Alerting Features - Panasonic Link2Cell KX-TGD862 Operating Instructions Manual

Answering System for Landline
Key Operation
9 or Stop recording
MSTOPN Stop playback
0 Turn answering system off
*3 Erase currently playing
*4
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a MSELECTN
Calling back (Caller ID subscribers
only)
n Using a landline:
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
n Using a cellular line:
1
Press MPAUSEN during playback.
2
MbN: "Call back (Cell)" a
MSELECTN
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 21).
3
MbN: Select the desired cellular phone.
a MSELECTN
Editing the number before calling back
n Using a landline:
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 54).
4
M N
For assistance, please visit http://shop.panasonic.com/support
64
TA Manual_TGD86x_0921.pdf 64
n Using a cellular line:
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 54).
4
MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 21).
5
MbN: Select the desired cellular phone. a
MSELECTN
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the "Base unit beep"
setting is turned on. The default setting is
"Off".
1
MMENUN#339
2
MbN: Select the desired setting. a
MSAVEN
3
MOFFN
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
2020/09/21 16:00:01