Console Redirection - Acer AT150 F1 Series User Manual

96

Console Redirection

Parameter Description
Console Select Enabled to use Console
Redirection Redirection for remote access. If Remote
Access is set to Enabled, the following
items will display.
Serial Port This feature allows the user to decide
Number which serial port to be used for Console
Redirection.
Base This item displays the base address and
Address, IRQ of the serial port used for Console
IRQ Redirection. The default setting is 2F8h,
3.
Serial Port This feature allows the user to set the
Mode serial port mode for Console Redirection.
Flow This feature allows the user to set the
Control flow control for Console Redirection.
Redirection Select Disabled to turn off Console
After BIOS Redirection after Power-On Self-Test
POST (POST). Select Always to keep Console
Redirection active all the time after
POST. (Note: This setting may not be
supported by some operating systems.)
Select Boot Loader to keep Console
Redirection active during POST and Boot
up.
Terminal This feature allows the user to select the
Type target terminal type for Console
Redirection.
VT-UTF8 Select Enabled to enable VT-UTF8
Combo Key Combination Key support for ANSI/
Support VT100 terminals.
4 System BIOS
Options
Enabled
Disabled
COM1
COM2
115200 8, n 1
57600 8, n, 1
38400 8, n, 1
9200 8, n, 1
9600 8, n, 1
None
Hardware
Software
Disabled
Boot Loader
Always
ANSI
VT100
VT-UTF8
Enabled
Disabled