Ata Controller Configuration - Acer AT150 F1 Series User Manual

Parameter
Clock Spread
Spectrum

ATA Controller Configuration

When this submenu is selected, the AMI BIOS automatically detects the
presence of IDE or SATA devices and displays the following items.
Parameter
SATA#1
Configuration
Configure
SATA#1 as
ICH RAID
CodeBase
(Available
when the
option-RAID
is selected.)
SATA#2
Configuration
(Available when
the option IDE is
selected.)
SATA PORT0~
SATA PORT5
Description
Select Enable to enable Clock
Spectrum support, which will allow
the BIOS to monitor and attempt to
reduce the level of Electromagnetic
Interference caused by the
components whenever needed.
Description
Select Compatible to set SATA#1 to
legacy compatibility mode. Select
Enhanced to set SATA#1 to native SATA
mode.
This feature allows the user to select the
drive type for SATA#1.
Select Intel to enable Intel's SATA RAID
fi rmware to confi gure Intel's SATA
RAID settings. Select Adaptec to enable
Adaptec's SATA RAID firmware to
configure Adaptec's SATA RAID settings.
Select Enhanced to set SATA#2 to native
SATA mode.
These settings allow the user to set the parameters of
the slots indicated above.
Press <Enter> to activate the following submenu. Set
the correct confi gurations accordingly. The items
included in the submenu are listed below.
75
Options
Enabled
Disabled
Options
Compatible
Disabled,
Enhanced
IDE
RAID
AHCI
Intel
Adaptec
Enhanced
Disabled