Advanced Chipset Control; Cpu Bridge Configuration - Acer AT150 F1 Series User Manual

82
Parameter
Onboard LAN
Option ROM
Select
Boots Graphic
Adapter Boot
Priority

Advanced Chipset Control

This submenu is used to configure the following sub-items:

CPU Bridge Configuration

Parameter
QPI Links Speed
QPI Frequency
(Available if QPI
Links Speed is set
to Full Speed)
QPI L0s and L1
Memory
Frequency
Description
Select iSCSI to use iSCSI Option ROMs
to boot the computer using a
network device. Select iSCSI to use
PXE Option ROMs to boot the
computer using a network device.
This feature allows the user to select
the graphics adapter to be used as
the primary boot device.
Description
This feature selects QPI's data
transfer speed.
This feature is used to select the
desired QPI frequency.
Select Enabled to lower the QPI
power state. L0s and L1 are
automatically selected by the
motherboard.
Use this feature to force a DDR3
memory module to run at a
frequency other than what the
system has detected.
4 System BIOS
Options
PXE
iSCSI
Onboard VGA
Add-on VGA
Options
Slow-mode
Full Speed
Auto
4.800 GT
5.866GT
6.400 GT
Enabled
Disabled
Auto, Force DDR-
800, Force DDR-
1066, Force DDR-
1333, and Force
SPD