Console Redirection - Acer AR320 F2 Service Manual

Console Redirection

Parameter
Console Redirection
Terminal Type
Bits per second
Data Bits
Parity
Stop Bits
Flow Control
Description
Select whether to enable console
redirection. Console redirection
enables users to manage the
system from a remote location.
Select a terminal type to be used for
console redirection.
Select the baud rate for console
redirection.
Select the Data Bits.
A parity bit can be sent with the data
bits to detect some transmission
errors.
Even: parity bi is 0 if the num of 1's
in the data bits is even.
Odd: parity bit is0if num of 1's the
data bits is odd.
Mark: parity bit is always 1.
Space: Parity bit is always 0.
Mark and Space Parity do not allow
for error detection.
Stop bits indicate the end of a serial
data packet. (A start bit indicates the
beginning).
The standard setting is 1 stop bit.
Communication with slow devices
may require more than 1 stop bit.
Flow control can prevent data loss
from buffer overflow. When sending
data, if the receiving buffers are full,
a 'stop' signal can be sent to stop
the data flow. Once the buffers are
empty, a 'start' signal can be sent to
re-start the flow. Hardware flow
55
Option
Serial Port 1
Serial Port 2
Disabled
VT100
VT100+
ANSI
VT-UTF8
9600
19200
57600
115200
7
8
None
Even
Odd
Mark
Space
1
2
None
Hardware RTS/CTS