Table of Contents
Advertisement
Hard disk drive configuration guidelines
Observe these guidelines when replacing or installing a hard disk drive.
•
Use only qualified SAS or SATA HDDs. To purchase a SAS or SATA
HDD, contact your local representative.
•
Install hard disk drives in the special drive carriers that fit in the
hard drive bays.
•
Before removing an HDD, make sure to back up all important
system files.
•
Check HDD status by checking the status LED indicators on the
HDD carrier.
•
The hard disk drive carriers must be installed in the following
order:
2.5-inch HDD bays
3.5-inch HDD bays
31
Advertisement
Table of Contents
Troubleshooting
