Removing The Hdd Cage - Acer Altos G710 Service Manual

2. Disconnect the CD-ROM power cable and IDE cable.
3. Press the both side tabs to release the CD-ROM unit
4. Remove the two screws on each side to detach the CD-ROM bracket.
5. Press the latches to pull the Floppy module
6. Disconnect the floppy power cable and IDE cable.
7. Remove the four screws to release the FDD.
8. Separate the FDD carrier from the FDD unit.

Removing the HDD Cage

1. Loosen the four thumbscrews to release the Hard disk cage.
2. Pull the Hard disk cage a little out from the chassis.
3. Disconnect another power cable from the SCSI backplane board.
4. Pull the entire HDD cage with cables out from the chassis.
66 Altos G710