Table of Contents
Advertisement
Parameter
Hyper Threading Function
Auto-detect CPU Frequency Enables or disables the auto-detect CPU fre-
CPU Frequency to Bus Ratio Bus/bus ratio of the system. The clock
Boot up Num Lock
PS/2 Mouse Support
Wait for 'F1' if Error
MPS Revision
Memory Test
46
Description
Enables or disables the Hyper-Threading
function of the processor.
When enabled, one physical processor acts
as two logical processors by "threading" two
sets of data instructions in parallel streams
for processing. The processor canthen
simultaneously manage in coming data from
different applications without losing track of
the data processing status of each.
quency function.
speed of the bus does not necessarily equal
the speed of the CPU. Mostly, the bus clock
speed is slower than the CPU clock speed.
Activates the Num Lock function upon boot-
ing.
Enable this parameter if you intend to use a
mouse or trackball with a PS/2 interface.
When this item is enabled you will be
prompted to press F1 when an error is
detected during boot up.
Version of the multiprocessor specifications. 1.4
When enabled, this parameter allows the
system to perform a RAM test during the
POST routine.
When disabled, the system detects only the
memory size and bypasses the test routine.
Option
Enabled
Disabled
Enabled
Disabled
Auto
On
Off
Enabled
Disabled
Enabled
Disabled
1.1
Disabled
Enabled
Chapter 2
Advertisement
Table of Contents
