Table of Contents
Advertisement
ASM
Acer Server Management is a server management tool. It is specially designed to help spot errors or potential
trouble spots in the network servers through a single management station. ASM can send a query to a remote
server over the network to request information such as system hardware and software configuration, system
resource usage, and system performance.
The complete ASM package consists of two major components --- the ASM Agent and the ASM Console. The
ASM Agent are the servers to be managed on the network. The ASM Console is a Windows-based monitoring
station that communicates with the ASM Agents and can be installed on any agent's workstation on the
network.
System Requirements
ASM requires TCP/IP connectivity between the ASM Agent and the ASM Console.
ASM Agent
Intel Pentium III (500 MHz) or higher processor
128 MB of RAM
SCSI/IDE hard drive with at least 100 MB free hard disk space
Microsoft Windows NT 4.0 or Windows 2000 Server/Advanced Server operating system
ASM Console
Intel Pentium III (500 MHz) or higher processor
128 MB of RAM
SCSI/IDE hard drive with at least 100 MB free hard disk space
Microsoft Windows 2000 Professional/XP/Server/Advanced Server operating system
Ethernet card
System Setup
Make sure that your system meets the requirements listed above before proceeding. You may also want to
change your screen resolution to 800 x 600 or higher for optimum viewing.
Installing ASM Agent
Follow the steps below:
1.
Log in to the managed server using the Administrator account.
2.
Insert the EasyBUILD Management CD into the server's CD-ROM drive. The installation sequence will
automatically be displayed.
3.
Select the option for ASM installation. The installation wizard will be initialized.
4.
Follow all onscreen instructions to complete the installation.
For detailed instructions on installing ASM Agent, refer to the ASM User's manual.
To launch the program, on the Windows taskbar click on the Start button, point to Programs, select Acer
Server Management Suite then click ASM Agent.
Installing ASM Console
Follow the steps below:
1.
Log in to the target Windows-based PC using the Administrator account.
2.
Insert the EasyBUILD Management CD into the computer's CD-ROM drive. The installation sequence will
automatically be displayed.
3.
Select the option for ASM installation. The installation wizard will be initialized.
Chapter 1
27
Advertisement
Table of Contents
