Remote Access Configuration
The Remote Access Configuration submenu lets you define the parameter settings for the system's serial
ports.
Parameter
Remote Access
Serial Port Number
Serial Port Mode
Post-Boot Support
Terminal Type
50
Description
Enables or disables remote serial access.
Assigns a serial port to be used for
connecting to the console.
Sets the transfer rate for the serial
port. The parameter setting depends
on your modem specification;
therefore, before you change the
setting of this parameter, check the
documentation that came with your
modem.
Enables or disables the BIOS console
redirection during system boot up.
Selects the console type.
Option
Serial
Disabled
COM1
COM2 (via BMC)
115200 8,n,1
57600 8,n,1
19200 8,n,1
Disabled
Enabled
ANSI
VT100
VT-UTF8
Chapter 2