Changing A System Password; Removing A System Password - Acer Altos G330 MK2 Series User Manual

74

Changing a system password

1 Use the up/down keys to select a password parameter (Set
Supervisor Password or Set User Password), then press Enter.
2 Type the original password then press Enter.
3 Type a new password then press Enter.
4 Retype the password to verify the first entry then press Enter
again.
5 Press F10.
6 Select Yes to save the modified password and close the Setup
Utility.

Removing a system password

1 Use the up/down keys to select a password parameter (Set
Supervisor Password or Set User Password), then press Enter.
2 Enter the current password then press Enter.
3 Press Enter twice without entering anything in the new and
confirm password fields.
After doing this, the system automatically sets the related
password parameter to Clear.
4 System BIOS