To Install A Dimm; Reconfiguring The System Memory - Acer Altos G310 MK2 Series Manual

44

To install a DIMM

1 Observe the precautions and pre-installation procedures described
in "ESD precautions" on page 29.
2 Locate the DIMM sockets on the mainboard.
3 Open the clips on the socket.
4 Align then insert the DIMM into the socket (1).
5 Press the holding clips inward to lock the DIMM in place (2).
DIMMs must be installed in the following order: DM1. DM2, DM3 and DM4
Note: The DIMM socket is slotted to ensure proper installation.
If you insert a DIMM but it does not fit easily into the socket, you
may have inserted it incorrectly. Reverse the orientation of the
DIMM and insert it again.
6 Observe the "Post-installation instructions" on page 30.

Reconfiguring the system memory

The system automatically detects the amount of memory installed.
Run the BIOS setup to view the new value for total system memory and
make a note of it.
4 Configuring the system