Error Message
Memory Size Decreased
Memory Size Increased
Memory Size Changed
No Boot Device Available
Off Board Parity Error
On Board Parity Error
Parity Error
NVRAM / CMOS / PASSWORD cleared
by Jumper
<CTRL_N> Pressed
Explanation
Memory size has decreased since the last
boot. If no memory was removed, then
memory may be bad.
Memory size has increased since the last boot.
If no memory was added, there may be a
problem with the system.
Memory size has changed since the last boot.
If no memory was added or removed, then
memory may be bad.
System did not find a device to boot.
A parity error occurred on an offboard card.
This error is followed by an address.
A parity error occurred in onboard memory.
This error is followed by an address.
A parity error occurred in onboard memory at
an unknown address.
NVRAM, CMOS, and passwords have been
cleared. The system should be powered down
and the jumper removed.
CMOS is ignored and NVRAM is cleared. User
must enter Setup.
97